Renting a drill in Bengaluru: TV mounts, curtain rods and shelves
In short
For brick or block walls, rent a hammer drill with 6 mm and 8 mm masonry bits; for a concrete beam or column, a rotary hammer (SDS-plus). Use 8 mm plugs for a TV mount and 6 mm for curtain brackets, scan for wiring first, and never drill straight above or below a switchboard.
Which drill for which wall
- Brick or concrete block walls (most flat interiors): a hammer drill, also sold as an impact drill, with masonry bits.
- Concrete beams, columns and the ceiling: a rotary hammer with SDS-plus bits. A hammer drill will barely scratch them.
- Wood and metal: the same drill with hammer mode off and the right bit.
- Bathroom or kitchen tiles: a tile bit, hammer mode off, masking tape over the spot so the bit does not wander.
Bits and plugs for common jobs
- TV wall mount: 8 mm bit and 8 mm plugs, at least four screws. Check the mount matches your TV's VESA hole pattern.
- Curtain brackets and light shelves: 6 mm bit and 6 mm plugs.
- Heavy shelves or a geyser: 8–10 mm plugs or anchor bolts into solid wall, never into plaster alone.
Before you drill
Wiring in concealed conduit usually runs straight up or down from switchboards and sockets, so keep clear of those vertical lines and use a wall scanner. Kitchens and bathrooms also hide water pipes.
Most apartment associations allow drilling only in daytime hours on weekdays. Check yours, and tell the neighbours if it is a long job.
Rent the kit, not just the drill
A ladder, a wall scanner, a spirit level and a bit set make the job go quicker; owners often list them together as a tool kit. Wear goggles and a mask: drilling plaster throws fine dust.
Pickup checklist
- Drill runs in both directions and the hammer mode switch works
- Chuck grips a bit tightly (keyless or SDS)
- Battery charged, charger included, or cord undamaged
- Bit set includes the 6 mm and 8 mm masonry bits you need
Typical prices in Bengaluru
| Type | Per day | Deposit (about) |
|---|---|---|
| Drills & drivers | ₹100–350 | ₹500 |
| Rotary & demolition hammers | ₹150–600 | ₹1,000 |
| Ladders | ₹150–750 | ₹500 |
| Measuring & laser levels | ₹150–500 | ₹1,000 |
| Hand tool kits | ₹100–600 | ₹500 |
Lumo catalogue ranges for Bengaluru; each owner sets their own price, and the deposit is held by Lumo. All rental prices
Questions
Which drill do I need for a concrete wall?
A rotary hammer with SDS-plus bits for concrete beams, columns and ceilings. A hammer drill with masonry bits handles brick and block walls.
What size plug do I need for a TV wall mount?
8 mm plugs with an 8 mm masonry bit and at least four screws into solid wall, not plaster alone.
Can I rent a drill for a day in Bengaluru?
Yes. Owners on Lumo Bazaar list drills, rotary hammers, ladders and tool kits by the day; the deposit is held by Lumo and settled after the owner confirms the return.